Pompe DHE Diamond Series


 

Diamond Series

Diamond Series

Diamond Series

Diamond Series

 

Hopper Industrial Series

The Diamond Series with hopper an auger feed screw to convey directly the product to hydraulic part, are the ideal machines for pumping viscous and non-flowing, with a very high solids content.
DH and JH Series is the basic version with rectangular hopper and auger feed the hydraulics. The length is customizable depending on application. Suitable for pumping substances poorly flowing up to 18% of dry substance which does not tend to form a bridge. The DH and JN series are distinguished for the type of fitting of the pump to the drive.

 

  • DH Series: the drive is coupled directly to the pump via a flange. This solution is extremely cheap and compact, considerably reducing installation costs and simplifying maintenance. The stress generated by the hydraulic part is supported by the drive itself. Each drive used is adequately selected based on their specific technical parameters and are subject to numerous duration tests with heavy loads.

DH series

dhe-garolla

 

 

 

Typical applicationsTable of Models Detailed CharacteristicsStrenghtsVideo

Sewage sludge
Water Treatment
Industrial sludge
Detergents and product for chemical industry
Product of papermaking industry
Agriculture
Product derived from petro-chemical
Marine Industry

Operating range

Flow

Up to110m³/h
Pressure
Up to 24 bar for the standard series (48bar for the series K8)
Temperature
from -40°C until to 150°C

Flow and Pressure

SizeModelQmax 2 bar [m³/h]rpm maxP max [bar]
D0252L16.910006
D0251K29.4100012
D02505K41.580024
D0304L1118006
D0302K25.680012
D0301K42.260024
D04010L116.56006
D0404K28.560012
D0402K43.750024
D04016L123.56004
D0408K2126008
D06020L1285006
D06010K21450012
D0604K45.740024
D06030L1335004
D06016K216.55008
D12040L1434006
D12020K22040012
D12010K41035024
D12060L163.54004
D12030K2324008
D30080L1763506
D30040K23835012
D30020K415.430024
D300120L11103504
D30060K2553508

Details
Material
Casing material

Base materials:
S275JR, AISI 304, AISI 316

Materials of the sealing shaft

Base materials:
AISI 420, AISI 304, AISI 316, F51(Duplex), F55 (Super Duplex)
Coatings:
Hardened Chrome plated HCP
Chrome oxide plasma (ceramic coating)

Rotor material

Base materials:
AISI 420, AISI 304, AISI 316, F51(Duplex), F55 (Super Duplex)
Heat treatments:
Hardening induction (only on AISI 420)
Coatings:
Hardened Chrome plated HCP
Chrome oxide plasma (ceramic coating)
Tungsten carbide HVOF

Stator material

Base materials:
NBR, food grade NBR, white NBR food grade
EPDM, EPDM food grade, white EPDM food grade
FPM, FPM food grade
HNBR, HNBR food grade
SYLICON
Buna-N ( available on select models on request)
HYPALON (available on select models on request)
PTFE (available on select models on request)

Base plates
Base plates

standard Base
Base with anti-vibration housing (feet spacer)
Base with risers
Skid with lifting devices
Cart for industrial sector (trolley)
Cart for food grade and winery sector
(For details, see the brochure constructive options, equipment and installations)

Connections
Flange UNI 2278 PN16 for pumps at 1 and 2 stage
Flange UNI 2284 or 6084 PN40 for inlet unions for pumps at 4 stage
Flange UNI 2285 PN64 for inlet unions for pumps at 8 stage
Threaded connection GAS BSP
Sealing system
Gland packing seal B01
Gland seal with flushing B02 (flushed according to API PLAN 51, 52, 55)
Single mechanical seal G0K9 (API PLAN 2 or flushed according to API PLAN 11, 32)
Single mechanical seal with Quench Q0K9 (flushed according to API PLAN 51, 52, 55)
Back-to-back double mechanical seal D0K9 (flushed according to API PLAN 53A, 54)
Tandem double mechanical seal K0K9 (flushed according to API PLAN 52, 53A, 55)
Single or double cartridge seals als in API 682 version category 1
(For construction details, see the brochure sealing systems and seals)
Optional for transmission shaft
Protector joint
(For details, see the brochure constructive options, equipment and installations )
Protection devices
Temperature probe for dry running protection (standard in the ATEX version)
Flow switch
Pressure switch
Flanged overpressure valve
Hygienic overpressure valve
(For details, see the brochure constructive options, equipment and installations )
Control devices
Control panel
Control panel with inverter
Drive with integrated inverter
(For details, see the brochure constructive options, equipment and installations )
Equipment and optional
Stator heating jacket
Heating jacket for hopper
Stainless steel stator cover
CIP connection
Outlet eccentric pipe
Separate entrance
Tangential flanged connection or with threaded connection
Barrel flushing
Coupling flange
Hermetic coupling flange
Carter to protect the motorization
(For details, see the brochure constructive options, equipment and installations )
Certifications
CE
ATEX
API 676 third edition

 

 

Brochure DHE Baureihe WeinIndustrie-Pumpe
Brochure DHE Baureihe WeinIndustrie-Pumpe

Brochure DHE Baureihe WeinIndustrie-Pumpe
Diamond Baureihe Exzenterschnecken
lang: Deutsch

Brochure DHE Série avec trémie
Brochure DHE Série avec trémie

Brochure DHE Série avec trémie
Diamond Series Pompes à cavité progressive
lang: Francais

Brochure DHE
Brochure DHE

Brochure DHE
Diamond Series Progressing Cavity Pumps
lang: English

Brochure DHE uso enologico
Brochure DHE uso enologico

Brochure DHE uso enologico
Diamond Series Pompe a Cavità Progressiva
lang: Italiano